Free every Monday, no card

Get the free Monday listFree listno card

10 cleaning tender mistakes and how to avoid them

Guide for cleaning firms of about 5–50 staff Facts checked 17 November 2026 9 min read

On this page
  1. 1. Missing the deadline or the upload
  2. 2. Failing a pass/fail requirement
  3. 3. Not answering the question asked
  4. 4. Copy-paste method statements
  5. 5. Pricing errors: blank lines and prices that are too low
  6. 6. Forgetting TUPE and the wage rise
  7. 7. No evidence or references
  8. 8. Treating social value as an afterthought
  9. 9. Not asking clarification questions
  10. 10. Not asking for feedback after losing
  11. A final check before you submit
  12. Frequently asked questions

The mistakes that cost small cleaning firms public tenders can all be checked for before you submit: a late or incomplete upload, a failed pass/fail test, an answer that misses the question or the word limit, a price with gaps, TUPE or wage rises left out, and claims with no evidence. Under the Procurement Act 2023, a buyer must disregard a tender from a supplier that fails the conditions of participation, and may disregard one that breaks a procedural rule or has an abnormally low price (Procurement Act 2023, s.19).

This guide is for owners of cleaning firms with 5–50 staff bidding for public contracts in England. It is a checklist: each mistake links to a fuller guide. Rules and figures were checked on 17 November 2026.

Key takeaways

  • A late tender and one over the word count are GOV.UK's examples of breaches a buyer may disregard (GOV.UK guidance on assessing competitive tenders).
  • The National Living Wage is £12.71 an hour from April 2026 and £13.21 from April 2027, so a contract running past 1 April 2027 needs the new rate in its price (GOV.UK).

The Act's tendering rules cover public contracts: in short, contracts valued at or above the threshold amounts that aren't exempt (Procurement Act 2023, s.3). For smaller contracts the tender pack sets the rules, so read it just as closely. See the Procurement Act 2023.

1. Missing the deadline or the upload

A buyer may disregard a tender that breaches a procedural requirement in the tender notice or documents, and a late tender is GOV.UK's example (GOV.UK guidance on assessing competitive tenders). Buyers should highlight which procedural requirements could lead to a tender being disregarded (GOV.UK guidance on competitive tendering procedures), so look for that list.

How to avoid it:

  • Diary the clarification and tender deadlines, with times, the day you download the pack.
  • Register on the portal and test your login early.
  • List every document asked for, in the format asked for, and tick each off as you upload it.
  • Submit at least a day early, then check the portal shows it as submitted and keep the receipt.

See how to read a cleaning tender pack.

2. Failing a pass/fail requirement

A buyer must disregard any tender from a supplier that does not satisfy the conditions of participation (Procurement Act 2023, s.19). The assessment methodology must say if failing a pass/fail criterion would disqualify a tender (GOV.UK guidance on assessing competitive tenders).

The Act limits what buyers can demand: conditions must be proportionate, particular qualifications can't be required without allowing equivalents, and contract insurance can't be required before award (Procurement Act 2023, s.22).

How to avoid it: before you write a word, list every pass/fail item (insurance, turnover, accreditations, policies, DBS checks) and mark each yes or no. If you hold an equivalent to a named scheme, ask whether the buyer accepts it. See insurance and turnover tests and cleaning tender accreditations.

3. Not answering the question asked

Buyers must base their assessment on the published assessment methodology (GOV.UK guidance on assessing competitive tenders). A good answer to a different question can still score poorly, and going over the word count is the guidance's other example of a breach a buyer may disregard.

How to avoid it:

  • Split each question into its parts and answer them in order, under the buyer's own headings.
  • Read the scoring guidance and show what the top mark band asks for.
  • Check how the pack counts words, then stay inside the limit.

See how to write quality answers for cleaning tenders.

4. Copy-paste method statements

A method statement reused from another bid can describe a different building, different hours, even a different client. The tender documents must give enough information for you to prepare a tender for this buyer's requirement (Procurement Act 2023, s.21), so use it.

How to avoid it: turn the specification into a checklist of sites, areas, frequencies and hours, and cover each by name. Say who does what, when, with which equipment and how you check it. Search the text for any other client's name before you upload. See how to write a cleaning method statement.

5. Pricing errors: blank lines and prices that are too low

A blank line or broken formula makes your price unclear. If the pack says every line must be priced, a gap breaks a procedural requirement, and the buyer may disregard the tender (Procurement Act 2023, s.19). If a line doesn't apply to you, ask how to show it.

A buyer may also disregard a tender whose price it considers abnormally low. First it must tell you and give you a reasonable opportunity to show you can perform the contract for that price; if you satisfy it, it can't disregard the tender on that ground (Procurement Act 2023, s.19). GOV.UK guidance notes that a low price can come from inaccuracies in cost modelling (GOV.UK guidance on assessing competitive tenders).

How to avoid it:

  • Price every line, then check the totals carry through to the summary sheet.
  • Check that annual hours times your hourly cost matches what you've entered.
  • Keep your workings, so you can explain your price quickly if asked.

See how to price a cleaning tender without losing money.

6. Forgetting TUPE and the wage rise

When cleaning moves to a new contractor, the cleaners doing it are likely to be protected by TUPE: their terms and conditions transfer and their continuity of employment is kept (GOV.UK). Price for the people who will transfer, not new staff on your terms. The outgoing employer must give you employee liability information at least 28 days before the transfer (TUPE Regulations 2006, reg. 11), which is too late for pricing, so ask the buyer for staff details during the tender.

The National Living Wage for workers aged 21 and over is £12.71 an hour from April 2026 and £13.21 from April 2027; the rates change on 1 April each year (GOV.UK). Price each contract year at the rate that will apply, and check whether the contract lets your price rise with it.

See TUPE in cleaning contracts.

7. No evidence or references

A buyer can ask for evidence that someone other than you can verify (Procurement Act 2023, s.22). "High standards" or "experienced staff" with nothing behind them gives an evaluator little to score.

How to avoid it:

  • Back each claim with something checkable: audit results, response times, training records or certificates.
  • Line up referees early and ask their permission each time.
  • No public sector work yet? Offer your closest private contracts. A buyer can't require you to have been awarded a contract by a particular contracting authority (Procurement Act 2023, s.22).

See what buyers check in a cleaning tender.

8. Treating social value as an afterthought

Central government buyers in scope of PPN 002 must give social value a minimum weighting of 10% of the total score (PPN 002 guide). For their procurements of £1m or more starting on or after 1 January 2027, PPN 026 sets 10%, or 20% at £5m or more, and other public buyers "may wish to adopt" the approach (PPN 026). Other buyers set their own weighting, so check the pack.

Under PPN 002, social value must be over and above the contract's core deliverables, and criteria based on a supplier's general corporate policies must not be used (PPN 002 guide).

How to avoid it: offer a few specific commitments tied to this contract, such as local hiring or training, and say how many, by when and how you'll report them. Promise only what you can deliver and pay for. See social value in cleaning tenders.

9. Not asking clarification questions

The tender documents must give enough information to prepare a tender, and the buyer must be satisfied its requirements are sufficiently clear and specific (Procurement Act 2023, s.21). It must also treat suppliers the same unless a difference between them justifies different treatment (Procurement Act 2023, s.12).

How to avoid it: ask through the portal, before the clarification deadline, about anything that changes your price or answer: missing hours or floor areas, TUPE information, an unclear pass/fail test or how a question is scored. Check how the pack says it will share questions and answers. See how to approach a buyer before a re-tender.

10. Not asking for feedback after losing

Above the threshold, every supplier whose tender was assessed must get an assessment summary before the contract award notice is published (Procurement Act 2023, s.50). It gives your score for each criterion, explains each score and includes information on the winning tender; wider feedback isn't a legal requirement (GOV.UK guidance on assessment summaries). A standstill period of eight working days then begins on the day the award notice is published (Procurement Act 2023, s.51).

How to avoid it: read the summary the day it arrives, note where you dropped marks against the winner, and ask for any further feedback. For smaller contracts, ask anyway. Log your scores by question, so a weak answer isn't reused. See lost a cleaning tender?

A final check before you submit

  • Every pass/fail item met, with evidence attached.
  • Every question answered in order, inside the word limit.
  • Every pricing line filled, with TUPE costs and the April 2027 wage rate included where they apply.
  • Every document uploaded in the right format, at least a day early.

Frequently asked questions

Why do cleaning tenders fail?

For reasons you can check for: a late or incomplete submission, a failed pass/fail condition, answers that miss the question or break the word limit, pricing gaps or a price the buyer considers abnormally low, and claims with no evidence. Above the threshold, the Act sets out when a buyer must or may disregard a tender (Procurement Act 2023, s.19).

Can a buyer reject a tender that is a few minutes late?

It may disregard a tender that breaches a procedural requirement, and GOV.UK guidance gives a late tender as an example (GOV.UK guidance on assessing competitive tenders). Don't count on discretion: submit early.

Should I bid if I can't meet one pass/fail requirement?

Not as things stand, because a buyer must disregard a tender from a supplier that fails the conditions of participation (Procurement Act 2023, s.19). If it names a qualification and you hold an equivalent, ask before the clarification deadline: buyers must allow equivalents (Procurement Act 2023, s.22).

Researched and written with AI assistance.

Free bid check

Not sure whether to bid? We check the tender against your firm.

Tell us which tender and four facts about your firm: staff, turnover, accreditations and anything we should know. Within two working days we email you a one-page answer: bid, borderline or don’t bid, with the reasons.

Request a free bid check

Free. No card, no account. A one-page answer by email within two working days.

If you bid: the Tender Response Draft, £395 per tender. Your first pack: pay after you have read it.

Free weekly

Get the open cleaning tenders in your region every Monday, free.

Every Monday: up to three open public cleaning tenders in your region that are rated best for a small firm, with the deadline and the link to the official notice. One short email, no charge.